A registered business in the state of Colorado (ID# 20091276671 / 20131415285)
HBA Cause 4 K9s is a registered non-profit in the state of Colorado (ID# 20131451644)
VZ-58 80% Hybrid Receiver (type 2 demil)
Quantity in Basket:
Shipping Weight: 1.00 pounds
This is a new 80% "Hybrid" receiver that is a combination of Milled and Stamped components.
It requires that you square up & trim the front receiver section that came with your parts kit
behind the original locking lugs and weld the new rails in to place. This receiver is then completed by installing the Stamped receiver shell, center support, rear stock
mount using standard rivets
and completing the balance of required drilling.
(Shell, center support and rear stock mount Rivet to the side rails.)
The hole for mounting the stock will need threaded (Only if you are using the
and All holes for "Any" FCG will need to be drilled.
There is no machining for F/A components done on this receiver.
These parts may require some or all of the following: final fitting, Cutting, drilling, welding, setting and forming of rivets, trimming of spring(s) and final adjustments to fit your individual kit.
**As these are Custom built, please allow 6-12 weeks from receipt of payment to date shipped.**
I have received several emailed questions on the
VZ-58 hybrid receiver
and the current demill's. I threw together this info below
to try to help clarify.
The "Hybrid" receiver is designed to
work with the (what "I" call Type #2) demills.
Once the siderails are installed and the balance of the
receiver is assembled.
(stamped receiver riveted in place with the center and
Hope this clarifies the assembly process.
And here are some pictures of a completed build
with a set of the "Walnut Furniture w/finish" installed.
Additional photos , clarifications about Type I and Type II demils, Build instructions and legal warnings are located
All ATF/NFA rules apply to purchases made from this site.
The information/products in these web pages are not intended to be used to construct illegal firearms.
It is the sole responsibility of the purchaser to know and understand all applicable Federal, State and local laws before placing an order.
By placing any order you are agreeing that you accept all legal responsibility for the products purchased and their subsequent use.
For legal semi auto and dummy gun information, contact BATF at:
Every reasonable effort has been made to ensure that all photographs, descriptions and specifications on this website are accurate.
However, inadvertent errors may occur, and changes in design or materials, due to our continual effort to improve products, may result in some change in specifications before subsequent publications are issued.
HBA reserves the right to modify or change specifications with or without notice at any given time.